ETAlab series benches, “H” leg

The concept is entirely modular, our desks are built to adapt to the specific needs of each laboratory. They are made of:

  • “H” shaped metal legs in 30×30 mm steel tube with fixing panels in water-repellent melamine;
  • work plan;
  • upstand or backsplash with shelf

Our counters exist in many configurations, in modules of 600, 900, 1200, 1500 and 1800 mm. The bases are coated with gray antacid epoxy resins RAL 7035. The depths are 2: 600 or 750 (without backsplash and shelf).
“H” base in 30×30 mm steel tube with adjustable feet for leveling; bottom panel; front fascia; rear fascia; riser (depending on the configuration); shelf (depending on configuration). Our furnishings comply with the NFX-201 standard. Height without upstand and shelf: 900 mm. With upstand and shelf: 1100 mm. Depth of the worktop: 600 or 750 mm. Maximum permissible load distributed without vibration 140 Kg / ml

Asem® EN Series ISP200 Self-supporting Hoods

The ASEM® exhaust extraction laboratory hoods for laboratory exhaust ensure the operator’s protection in the handling of toxic products, maintaining a work environment that meets safety requirements.
The careful design and construction has allowed us to obtain much better performance than the requirements required by EN standards. The hoods are available in different front sizes 120, 150, 180, 210 and 240 cm, versions in different materials with standard worktop 90 cm from the ground; for distillation with 50 cm height; walk-in for machining with cumbersome and heavy equipment; with total height 250 cm; with reduced height 230 cm with single or double sliding rail for low areas. All models are factory tested for the containment index and all certified according to EN 14175 2-3-4-5-6-7. Hoods must be considered as real and their own safety devices as they must guarantee the health of those working in the laboratory.